Omron DeviceNet Safety, System Configuration Manual

Page: 117 / 376

83
Configuration Lock Section 3-9
• When verified device parameters are edited, the Verified configura-
tion parameter symbol will disappear. The device parameters must
be verified again.
3-9-2 Unlocking the Device Configuration
The configuration must be unlocked to change device parameters for which a
configuration lock has been performed. Unlock the configuration for the
selected devices using any of the following methods. This function is enabled
only when the Network Configurator is online.
1.
Select one or more devices, and then select Device - Parameter - Unlock
from the menu bar.
2.
Select one or more devices, and then right-click each device and select
Parameter - Unlock .
Next, the password input window for the device will be displayed. As in 3-9-1
Locking the Device Configuration , enter the password for the selected devices
and click the OK Button.
When the configuration has been unlocked, the safety symbol attached to the
device icon in the virtual network will return to the
Verified configuration
parameter symbol.
Note When changing the device parameters after a configuration unlock, lock
the configuration after verifying the parameters again.
IMPORTANT Locking and unlocking cannot be performed in the EtherNet/IP Network Win-
dow for the NE1A-SCPU01-EIP or NE1A-SCPU02-EIP. Perform locking and
unlocking in the DeviceNet Network Window.
Refer to A-7 Function Restrictions for the NE1A-SCPU0
@
-EIP for information
on functions that cannot be manipulated in the EtherNet/IP Network Window
DeviceNet network EtherNet/IP network