manualshive.com logo in svg

Omron DeviceNet Safety, System Configuration Manual

Share
Download
Omron DeviceNet Safety System Configuration Manual Download Page 148

114

Editing Parameters for Logic Terminals (DST1-XD0808SL-1)

Section 4-2

5.

Check the settings and click the 

Next

 Button. 

The following Safety Logic Wizard - Input Dialog Box (the dialog box to edit
safety logic for inputs) will be displayed.

6.

Check the logic and make any changes as required. Click the 

Next

 Button.

The Safety Logic Wizard - Output Dialog Box (the dialog box to edit safety
logic for output) will be displayed.

7.

Check the logic and make any changes as required. Click the 

Next

 Button.

A confirmation dialog box will be displayed.

8.

Check that the settings are correct, and then click the 

OK

 Button. This

completes the settings.

Summary of Contents for DeviceNet Safety

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands