manualshive.com logo in svg

Omron DeviceNet Safety, System Configuration Manual

Share
Download
Omron DeviceNet Safety System Configuration Manual Download Page 30

xxviii

Unit Versions and Programming Devices

Network Configurator version 2.0

@

 or higher must be used when using a

NE1A-SCPU01-V1 or NE1A-SCPU02 Safety Logic Controller with unit ver-
sion 2.0. 
Network Configurator version 2.2

@

 or higher is required to use the NE1A-

SCPU01-EIP or NE1A-SCPU02-EIP.
The following table shows the relationship between unit versions and Network
Configurator versions.

Note

Can be used as a Safety Logic Controller with unit version 1.0.

Note

(1) Network Configurator version 1.5

@

 or lower can be upgraded to version

1.6

@

 free of charge.

(2) When using Network Configurator version 1.6

@

, there are no operational

differences in the NE1A-SCPU01-V1 and NE1A-SCPU02 Safety Logic
Controllers that derive from the unit version.

Unit Versions and Configuration Data

The following table shows the relationship between unit versions of NE1A-
series Controllers in network configuration files created with Network Configu-
rator version 2.2

@

 and the unit version of NE1A-series Controllers to which

configuration files are downloaded.

Note

(1) Downloading is possible if the device type is changed using the function

provided in Network Configurator version 2.2

@

. For details, refer to “Con-

verting Systems to New Versions of the NE1A Controller” on page xxix.

Model number

Network Configurator

Ver. 1.3

@

Ver. 1.5

@

Ver. 1.6

@

Ver. 2.0

@

/2.1

@

Ver. 2.2

@

NE1A-SCPU01
Pre-Ver. 1.0

Can be used.

Can be used.

Can be used.

Can be used.

Can be used.

NE1A-SCPU01-V1
Ver. 1.0

Cannot be used.

Cannot be used.

Can be used.

Can be used.

Can be used.

NE1A-SCPU02
Ver. 1.0

Cannot be used.

Cannot be used.

Can be used.

Can be used.

Can be used.

NE1A-SCPU01-V1
Ver.2.0

Cannot be used.

Cannot be used.

Can be used. 
(See note.)

Can be used.

Can be used.

NE1A-SCPU02
Ver.2.0

Cannot be used.

Cannot be used.

Can be used. 
(See note.)

Can be used.

Can be used.

NE1A-SCPU01-EIP

Cannot be used.

Cannot be used.

Cannot be used.

Cannot be used.

Can be used.

NE1A-SCPU02-EIP

Cannot be used.

Cannot be used.

Cannot be used.

Cannot be used.

Can be used.

Unit versions of NE1A-

series Controllers in 

Network configuration 

files created with 

Network Configurator 

version 2.2

@

NE1A-series Controller to which configuration file is downloaded

Pre-Ver. 1.0 CPU 

Unit

CPU Unit with unit 

version 1.0 that does 

not support 

EtherNet/IP

CPU Unit with unit 

version 2.0

CPU Unit with unit 

version 1.0 that 

supports EtherNet/

IP

Pre-Ver. 1.0 CPU Unit

Downloading is possi-
ble.

Not possible. (See 
note 1.)

Not possible. (See 
note 1.)

Not possible. (See 
note 1.)

CPU Unit with unit ver-
sion 1.0 that does not 
support EtherNet/IP

Not possible.

Downloading is possi-
ble.

Downloading is possi-
ble. (See note 2.)

Not possible. (See 
note 1.)

CPU Unit with unit ver-
sion 2.0

Not possible.

Not possible.

Downloading is possi-
ble.

Not possible. (See 
note 1.)

CPU Unit with unit ver-
sion 1.0 that supports 
EtherNet/IP

Not possible.

Not possible.

Not possible.

Downloading is possi-
ble.

Summary of Contents for DeviceNet Safety

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands