Omron DeviceNet Safety, System Configuration Manual

Page: 336 / 376

302
Appendix A
It is possible to display device information and to perform checks for the slave devices. Use the following proce-
dure.
1. Select a slave device from the Registered Device List.
2. Click the Advanced Setup Button.
3. The following window will be displayed.
Device Information Tab Page
The device information (vendor, device type, product code) of the currently selected slave device will be dis-
played.
Select these options to check device information (and indicate an error for inconsistencies) in remote I/O com-
munications (i.e., when a connection is opened).
The device information on the
selected slave will be displayed.
If these options are selected, the
device information will be compared
with the corresponding data in the scan
list during remote I/O communications.
If the information does not coincide
with the data, a verify error will occur.