Omron DeviceNet Safety, System Configuration Manual

Page: 96 / 376

62
Creating a Virtual Network Section 3-4
3-4-4 Deleting Devices
There are three ways to delete a device from a virtual network.
1.
Select a device, and then select Edit - Delete from the menu bar.
2.
Select a device, and then click the Delete Button on the toolbar.
3.
Select a device, and then right-click the selected device and select Delete .
A confirmation dialog box will be displayed before the deletion. Click the
Delete Button to delete the device.
3-4-5 Changing the Node Address or IP Address
When a device is added from the Device List, an unused node address or IP
address is automatically allocated sequentially in the order the device is
added.
There are two ways to change the allocated node address or IP address.
1.
Select a device, and select Device - Change Node Address from the
menu bar.
2.
Select a device, and then right-click the device and select Change Node
Address .
The following dialog box will be displayed. Change the node address or IP
address and click the
OK Button.
■
DeviceNet Device
■
EtherNet/IP Device
Note (1) The above method is used to change the node address or IP address of
devices on a virtual network.
(2) For information on changing the node address or IP address of devices
that are online, refer to A-5-2 Setting the Node Addresses and Baud
Rates via the Network and A-5-3 Setting TCP/IP Over a Network .
3-4-6 Changing Device Comments
When a device is added from the Device List, the displayed comment is the
device type. Device comments can be set in the following two ways.
1. Select a device, and then select Device - Change Device Comment from
the menu bar.