manualshive.com logo in svg

Omron DeviceNet Safety, System Configuration Manual

Share
Download
Omron DeviceNet Safety System Configuration Manual Download Page 71

37

Network Configurator Startup and Main Window

Section 3-1

3-1

Network Configurator Startup and Main Window

This section describes methods for starting and exiting the Network Configu-
rator, describes how to check the Network Configurator version and describes
the Main Window.

3-1-1

Starting and Exiting the Network Configurator 

Starting

Select 

Program

  -

OMRON Network Configurator for DeviceNet Safety

  -

Network Configurator 

from the Windows Start Menu (when using the default

program folder name).

The Network Configurator will start, and the following window will be dis-
played.

Exiting

Select 

File

 

-

Exit

 in the Main Window.

The Network Configurator will close.

Summary of Contents for DeviceNet Safety

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands