Omron DeviceNet Safety, System Configuration Manual

Page: 172 / 376

138
Setting the Controller as an EtherNet/IP Standard Target Section 5-4
You can add, change, or delete Standard Target I/O assemblies in this win-
dow. Input and output assemblies can be registered for each standard con-
nection.
• To add an I/O assembly, click the New Button. The I/O Assembly Setting
Window will be displayed. Define the I/O assembly data while referring to
5-3-3 Setting Assembly Data .
• To change the I/O assembly data, select the I/O assembly that you want
to change and click the Edit Button. The I/O Assembly Setting Window
will be displayed. Change the I/O assembly data while referring to 5-3-3
Setting Assembly Data .
• To delete the I/O assembly, select the I/O assembly that you want to
delete and click the Delete Button.
5-4-2 Setting Assembly Data
This section describes how to define I/O assembly data.
I/O Types
Select the connection type to be used for the I/O assembly. Input assemblies
and output assemblies can be set for each connection.
I/O Tags
Multiple I/O tags can be defined in an I/O assembly. The I/O tags defined here
can be used by the Logic Editor.