![background image](http://html1.mh-extra.com/html/omron/devicenet-safety/devicenet-safety_system-configuration-manual_743566181.webp)
147
Local I/O Settings
Section 5-5
Settings for Individual Test Outputs
Double-click the row of the test output number to set, or select the row and
click the
Edit
Button.
Terminal Name
Set the terminal name for the test output. The terminal name set here is
used as the I/O tag in the Logic Editor.
Test Output Mode
Set the Channel Mode for the test output.
Note
I/O tag names and I/O comments (names) cannot consist of only spaces.
5-5-4
Setting Safety Outputs
Click the
Local OUT
Tab to set the safety outputs.
Channel Mode
Description
Not Used
The corresponding Test Output is not used.
Standard Output
Specifies connecting to the input for a muting lamp or PLC. Used as a Monitor
Output.
Pulse Test Output
Specifies connecting a device with a contact output in combination with a safety
input.
Muting Lamp Output
Specifies a muting lamp output. (Setting supported only for T3 Terminal.) When
the output is ON, disconnection of the muting lamp can be detected.
Summary of Contents for DeviceNet Safety
