manualshive.com logo in svg

Omron DeviceNet Safety, System Configuration Manual

Share
Download
Omron DeviceNet Safety System Configuration Manual Download Page 271

237

Starting and Exiting the Maintenance Tool and Version Information

Section 9-2

9-2

Starting and Exiting the Maintenance Tool and Version 
Information 

This section describes how to start and exit the Maintenance Tool and how to
check the version. 

9-2-1

Starting and Exiting the Maintenance Tool

Start Procedure

1,2,3...

1.

To install the Network Configurator, select All Programs - OMRON Network
Configurator for DeviceNet Safety - Maintenance Tool from the Windows
Start Menu. 

To install only the Maintenance Tool, select All Programs - OMRON Main-
tenance Tool - Maintenance Tool from the Windows Start Menu.

The Maintenance Tool will start, and the following Main Window will be dis-
played.

Closing Procedure

1,2,3...

1.

Select 

Exit

 in the Main Window. 

The Maintenance Tool will close.

Summary of Contents for DeviceNet Safety

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands