![background image](http://html1.mh-extra.com/html/omron/devicenet-safety/devicenet-safety_system-configuration-manual_743566131.webp)
97
Editing Parameters
Section 4-1
IMPORTANT
When the Safety Input Channel Mode
is set to
Test Pulse from Test Out,
spec-
ify the test output to use for the test source and set the Test Output Channel
Mode of the test output to
Pulse Test Output.
S
Dual Channel Safety
Input Discrepancy Time
0 to 65,530 ms
(in 10-ms increments)
Sets the time to monitor the logic discrepancy
in the dual channel input logic.
0 ms
I/O Comment
32 characters max.
Sets an I/O comment for the safety input. The
I/O comment set here is used as the I/O tag in
the Logic Editor.
None
Maintenance Counter
Mode Choice
Time (total ON time)
Sets the operating mode for the maintenance
counter.
Time
Count (operation count)
Threshold Mainte-
nance Counter
0 to 4,294,967,295
hours
Sets the threshold value for the maintenance
counter.
0
Item
Settings
Description
Default
Summary of Contents for DeviceNet Safety
