Omron DeviceNet Safety, System Configuration Manual

Page: 152 / 376

118
Safety Connection Settings Section 5-1
After registration, the number of connections used and the number of connec-
tions that can be used are displayed in the center of the dialog box.
The following information is displayed in the Register Device List.
4. In the Register Device List, you can add and delete connections and edit
the connection parameters.
• To add a connection, select the Safety Slave that you want to add the con-
nection to and click the New Button. Refer to 5-1-2 Setting Safety Con-
nection Parameters to set the parameters.
• To delete a connection, select the connection you want to delete and click
the Delete Button.
• To edit connection parameters, select the connection you want to edit and
click the Edit Button. The parameters of the selected connection will be
displayed. Refer to 5-1-2 Setting Safety Connection Parameters to
change the parameters.
• Select the Safety Slave and click the Register/Unregister Button. If con-
nections are already set, the button cancels all the connections and if not,
it allocates the default connection and parameters.
Note • To delete a Safety Slave from the Register Device List, select the Safety
Slave you want to delete and click the Button.
• Also, when either of the following operations is performed in the Network
Configuration Window, the Safety Slave will be registered using auto-allo-
cation.
a. Dragging a slave device to the NE1A-series Controller.
b. Selecting a slave device and specifying the destination as the NE1A-
series Controller by selecting Device and then
Register to Other De-
vice from the menu bar.
IMPORTANT Changing safety connection settings may affect the program. After changing
any setting, always open the Logic Editor and check the program.
Item Information displayed
Product Name
The name of the registered Safety Slave ( icon) or I/O assembly used in the safety con-
nection ( icon) is displayed.
EPI The EPI for the safety connection is displayed. For details on EPI, refer to 5-1-2 Setting
Safety Connection Parameters.
Reaction Time The network reaction time for the safety connection is displayed.
Type The type of the I/O assembly used in the safety connection is displayed.
Size The data size of the I/O assembly used in the safety connection is displayed.