Omron DeviceNet Safety, System Configuration Manual

Page: 95 / 376

61
Creating a Virtual Network Section 3-4
1,2,3... 1. Select File - Open from the menu bar. The Open Dialog Box will be dis-
played. (You can also select project files saved from the previous version
of the Network Configurator.)
2. Two check boxes will be displayed in the Option Area: Select target net-
work and Add to current network . If neither of these check boxes is select-
ed, a file can be selected using the same procedure as for version 2.0.
3. As an example, select the Select target network Check Box and click the
Open Button. The following dialog box will be displayed.
4. The networks with configuration information saved in the file will be dis-
played. Select the networks for which the configuration information is to be
reused and click the
OK Button. The configuration information for only the
selected networks will be read.
5. If the Add to current network Check Box is selected in the Open Dialog Box
before the Open Button is clicked, the configuration information read from
the file will be added to the current network.
Note Starting from version 2.01, the network tabs that are displayed can be moved
by dragging and dropping them.