![background image](http://html1.mh-extra.com/html/omron/cs1w-clk12-v1/cs1w-clk12-v1_operation-manual_742356259.webp)
242
Locating and Correcting Cable Disconnections
Section 10-4
• Sets the control data.
• Sets the FINS command code.
06 06 Hex: NETWORK DISCONNECT DATA CLEAR
• Sends the 06 06 FINS command to all Communications Units (except the
local node) in the local network.
• Sets the control data.
• Sends the 06 06 FINS command to the Communications Unit at the local
node in the local network.
Note
1.
In CS-series PLCs, the Port Enabled Flag for the port being used (A20200
to A20207 correspond to ports 0 to 7) will be turned OFF even if the PRO-
TOCOL MACRO (PMCR) instruction is being executed.
2.
When using the sample program as written above, be sure that the bits and
words in the sample program are not already being used by the program
or other Special Units.
DM word
Contents
Function
D00000
00
02
Number of bytes of command data = 2 bytes
D00001
00
04
Number of bytes of response data = 4 bytes
D00002
00
00
Destination network address = 0 (the local network)
D00003
FF
FE
Destination node address = FF (broadcast to all nodes)
Destination unit address = FE (Communications Unit)
D00004
87
00
Response not required,
Transmission port number = 7,
Number of retries = 0 (Set to 0 for a broadcast.)
D00005
00
00
Response monitoring time = 0 s (Set to 0 for a broadcast.)
DM word
Contents
Function
D00000
00
02
Number of bytes of command data = 2 bytes
D00001
00
04
Number of bytes of response data = 4 bytes
D00002
00
00
Destination network address = 0 (the local network)
D00003
00
FE
Destination node address = 00 (local node)
Destination unit address = FE (Communications Unit)
D00004
07
02
Response required,
Transmission port number = 7,
Number of retries = 2
D00005
00
64
Response monitoring time = 10 s
Summary of Contents for CS1W-CLK12-V1
