![background image](http://html1.mh-extra.com/html/omron/cs1w-clk12-v1/cs1w-clk12-v1_operation-manual_742356110.webp)
93
Setting Data Links
Section 5-2
Data Link Tables
5-2-4
Automatic Setting: Select All
Data links can be automatically created by setting values in the DM parameter
area of the PLC’s CPU Unit of the startup node. The settings are made using
a Programming Console or the CX-Programmer, SYSMAC Support Software.
The startup node is the node from which the data links are activated. When
automatically setting data links, data link operation is based on the values set
in the startup node.
Note Data links can be started using one of the following (See p 99.)
• Using a software switch
• Using the Controller Link Support Software (Ver. 2.00 or higher) or the
CX-Programmer’s CX-Net utility
• Using FINS commands
Software switches
(DM area)
Startup node
CPU Unit
Or
Programming Console
CX-Programmer
IBM PC/AT or
compatible
Controller Link
Summary of Contents for CS1W-CLK12-V1
