143
Response Codes
Section 6-6
The configuration of each error record is as follows:
Error code, details: These parameters show the contents of errors. For
details, refer to 10-3-2 Error Codes.
Date and time: These parameters show the seconds, minutes, hour (0 to
23), date, month, and year (the rightmost two digits) in BCD specifying the
time that the error occurred.
Note
1.
If the PLC does not have the specified number of records, all the records
that have been stored in the PLC up to the point that the command is exe-
cuted will be returned.
2.
If there is no error log registered, a response code of 1103 (Hex) will be
returned.
3.
When Controller Link Units are used in duplex operation, if there is an ac-
tive/standby switchover resulting from an error in a Unit, the error log is not
inherited from one Controller Link Unit to another. To save the error log,
use this command or the Programming Device to read the error log as ap-
propriate.
6-5-15 ERROR LOG CLEAR
Clears all error log records and sets the error log pointer to 0.
Command Block
Response Block
6-6
Response Codes
This section describes the response codes returned with responses to FINS
commands. Response codes can be used to confirm normal completion of
command execution or to troubleshoot problems when commands fail. For fur-
ther troubleshooting information, refer to SECTION 9 Troubleshooting and
Maintenance of this manual and to the operation manuals for specific Units or
Systems.
Minute
Second
Day Hour Year Month
Details
Error code
1st byte
10th byte
Command
format
03
21
Command
format
03
21
Response
code
Summary of Contents for CS1W-CLK12-V1
