Mounting hole pattern
Typical spacing shown. Automotive name plate
requires 2.5" spacing. Some accessories also
require additional spacing.
—
INSTRUC TION SHEE T
A3P oil-tight push-pull operator
These instructions do not purport to cover
all details or variations in equipment nor
to provide for every possible contingency
to be met in connection with installation,
operation or maintenance. Should further
information be desired or should
particular problems arise that are not
covered sufficiently for the purchaser’s
purpose, the matter should be referred to
ABB Inc.
The contents of this instruction manual
shall not become part of or modify any
prior or existing agreement, commitment
or relationship. The sales contract
contains the entire obligation of ABB. The
warranty contained in the contract
between the parties is the sole warranty
of ABB. Any statements contained herein
do not create new warranties or modify
the existing warranty.
Cat. no.
A3PP4__
A3PP6__
A3PPM__
A3PT4R__
A3PB4__
A3PB6__
A3PBE__
A3PBF__
—
Step 3
Disassemble before installation
Large gaskets
Index locking ring
—
Step 1
1.25
[31.8]
1.25
[31.8]
2.25
[57.2]
0.672
[17.1]
0.190
[4.8]
Ø1.210
[Ø30.7]
2.25
[57.2]
Small gasket
—
Step 2
Name plate (optional)
2"
2
3
⁄
8
"
Large
—
Name plates
1
15
⁄
16
"
4
⁄
5
"
2"
Standard
4
⁄
5
"
2
7
⁄
16
"
2
7
⁄
16
"
Automotive
For replacement parts information or
an application guide, visit our website
at abb.com/low-voltage or contact
your ABB representative.
For more information on optional
mounting kits, name plates and
other accessories, visit
abb.com/low-voltage.
WARNING
Hazardous voltage. Can cause
death, serious personal injury
or property damage.
To avoid electrical shock, turn
off electrical power to controls
before performing installation
or maintenance.
1
