Mariner 100, Service Manual, Page: 164 / 391

4A-36 90-13645--2 395 POWERHEAD
REINSTALL WIRING HARNESS AND
COMPONENTS, AS A UNIT
S
Reinstall Trigger Assembly and Stator Assembly.
(Refer to Section 2 - this manual.) Apply Loctite
271 to stator screws and torque to
60 lb. in. (6.8 N
m).
S
Attach Electrical Component Mounting Plate.
Apply Loctite 271 to bolts and torque to
13.5 lb. ft. (18.3 N
m).
S
Install Starter Motor as outlined in Section 2.
Torque to 14.5 lb. ft. (19.7 N
m).
S
Attach Enrichener Valve and connect hose. See
Section 3B.
NOTE: See Section 2-D “Wiring Diagrams.”
S
Attach Temperature Sensor (g), with 2 screws.
NOTE: Temperature sensor opens at 170
_
F 8
_
(77
_
C 8
_
); closes at 190
_
F 8
_
(88
_
C 8
_
)
g
20368
S
Attach Test Button, if so equipped.
ELECTRICAL COMPONENTS INSTALLED
20412
20368
a
20414
b
c
d
25955
a - Temperature Sensor
b - Temperature Sensor Wire c - Spark Plug Wires
d - Horn Test Button