manualshive.com logo in svg

IDT Tsi578, User Manual

The IDT Tsi578 is a high-performance networking switch, and to help you make the most out of its features, we provide a comprehensive User Manual. This manual is available for free download from our website, ensuring effortless access to valuable product information and instructions for optimal usage.

Share
Download
background image

Tsi578 User Manual

June 6, 2016

Integrated Device Technology

www.idt.com

15

Tables

Table 1: 

Error Summary  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Table 2: 

Lookup Table States. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Table 3: 

Examples of Maintenance Packets with Hop Count = 0 and Associated Tsi578 Responses. . . . . . . . . . . . . . . . . . 53

Table 4: 

Tsi578 Port Numbering  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Table 5: 

Reference Clock Frequency and Supported Serial RapidIO Data Rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  70

Table 6: 

Serial Port Power-down Procedure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  73

Table 7: 

Lane Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  75

Table 8: 

Patterns Supported by Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  80

Table 9: 

Patterns Supported by Matcher  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  82

Table 10: 

Sample Register settings for WRR in a given priority group (WRR_EN=1)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  90

Table 11: 

Examples of Use of Watermarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  93

Table 12: 

Multicast Terminology   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Table 13: 

Tsi578 Events  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  122

Table 14: 

 Error Rate Error Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

Table 15: 

Port Write Packet Data Payload — Error Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  135

Table 16: 

Port x Error and Status Register Status  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  139

Table 17: 

Externally Visible I

2

C Register Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  155

Table 18: 

Format for Boot Loadable EEPROM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  171

Table 19: 

Sample EEPROM Loading Two Registers  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  171

Table 20: 

Sample EEPROM With Chaining  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  172

Table 21: 

I

2

C Error Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  174

Table 22: 

I

2

C Interrupt to Events Mapping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  178

Table 23: 

Performance Monitoring Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  189

Table 24: 

4x/1x Latency Numbers Under No Congestion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  194

Table 25: 

4x/1x Multicast Latency Numbers Under No Congestion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196

Table 26: 

Tsi578 Input Reference Clocks  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  207

Table 27: 

Tsi578 Clock Domains. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208

Table 28: 

Power-Up Options Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213

Table 29: 

Signal Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  215

Table 30: 

Tsi578 Port Numbering  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216

Table 31: 

Tsi578 Signal Descriptions    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219

Table 32: 

Address Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  229

Table 33: 

Register Access Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230

Table 34: 

Port Numbering  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  231

Table 35: 

Register map overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233

Table 36: 

Register Map  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  234

Table 37: 

Physical Interface Register Offsets  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  268

Table 38: 

Error Management Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  285

Table 39: 

STOP_FAIL_EN and DROP_EN Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  286

Table 40: 

ERR_TYPE Values  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300

Table 41: 

IDT-Specific Broadcast RapidIO Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  307

Table 42: 

IDT-Specific Per-Port Performance Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  308

Summary of Contents for Tsi578
















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Tsi578

4B M800 Elite Series Operation Manual preview
M800 Elite Series
Brand: 4B Pages: 12
Xunison Hub M50 Mesh Cube Quick Start Manual preview
Hub M50 Mesh Cube
Brand: Xunison Pages: 11
Ultra GammaView 2555 User Manual preview
GammaView 2555
Brand: Ultra Pages: 20
AdLuminis 324002 Quick Start Manual preview
324002
Brand: AdLuminis Pages: 8
Sams RSS-10v User Manual For Use And Maintenance preview
RSS-10v
Brand: Sams Pages: 14
Uniclass KLE Series User Manual preview
KLE Series
Brand: Uniclass Pages: 32
GeoVision GV-POE2411-V2 Manual preview
GV-POE2411-V2
Brand: GeoVision Pages: 7
Grizzly G8988 Instructions preview
G8988
Brand: Grizzly Pages: 2
Horstmann ServicePlus S11 User Operating Instructions Manual preview
ServicePlus S11
Brand: Horstmann Pages: 8
Veris Industries Hawkeye H950 Installation Manual preview
Hawkeye H950
Brand: Veris Industries Pages: 2
Allied Telesis AT 8000/8POE Installation Manual preview
AT 8000/8POE
Brand: Allied Telesis Pages: 56
KDS KD-MSW8x3 Operating Instructions Manual preview
KD-MSW8x3
Brand: KDS Pages: 10
Omron D4JL Series Manual preview
D4JL Series
Brand: Omron Pages: 31
NETGEAR ProSAFE FS526Tv2 Hardware Installation Manual preview
ProSAFE FS526Tv2
Brand: NETGEAR Pages: 20
Scion-Tech SC04.MX22 User Manual preview
SC04.MX22
Brand: Scion-Tech Pages: 9
QNAP QSW-M1208-8C Quick Installation Manual preview
QSW-M1208-8C
Brand: QNAP Pages: 30
3onedata ICS5400PTP-12GT12GS4XS Installation preview
ICS5400PTP-12GT12GS4XS
Brand: 3onedata Pages: 3
NETGEAR GS305Pv2 Installation Manual preview
GS305Pv2
Brand: NETGEAR Pages: 2

Brands by name

Popular brands

Load more brands