Parameter
Description
Teamwork power limit
function
After the teamwork power limit function is enabled,
you can set Teamwork total system power limit.
The master unit controls all units in the group to
ensure that the total power of units does not exceed
the value of Teamwork total system power limit.
Teamwork spray water
renewal function
● Enable: Only one unit in the group is allowed to
renew water at a time.
● Disable: Each unit in the group renews water
based on their own water renewal logic. Multiple
units can renew water at the same time.
Teamwork spray drain
function
● Enable: The units whose quantity is specified by
Teamwork systems draining spray water
together in the group are allowed to drain water
at the same time.
● Disable: Each unit in the group drains water based
on their own water renewal logic. Multiple units
can drain water at the same time.
Teamwork systems
draining spray water
together
This parameter is used together with Teamwork
spray drainage function to limit the number of units
that are allowed to drain water at the same time in a
group.
NOTE
This parameter is displayed after Teamwork spray drain
function is set to Enable.
Teamwork total system
power limit
Specifies the total power of the teamwork group.
Step 3 Perform
to configure teamwork control for all units in the
group.
Step 4 On the home screen of the display module of any unit in the teamwork group, tap
. If the teamwork networking succeeds, the teamwork topology of the unit in
the group is displayed.
Figure 7-5 Teamwork topology
FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
7 Power-On Commissioning
Issue 03 (2021-04-20) Copyright © Huawei Digital Power Technologies Co., Ltd.
121
