HP 37717C, Calibration Manual, Page: 31 / 399

1-10
General Information
Statement of Compliance
Statement of Compliance
This instrument has been designed and tested in accordance with IEC Publication
1010-1 + A1:1992 Safety requirements for Electrical Equipment for Measurement,
Control and Laboratory Use, and has been supplied in a safe condition. The
instruction documentation contains information and warnings which must be
followed by the user to ensure safe operation and to maintain the instrument in a
safe condition.
The CE mark shows that the product complies with all relevant
European legal Directives.
This is a symbol of an Industrial Scientific and Medical Group 1
Class A product.
The CSA mark is a registered trademark of the Canadian Stan-
dards Association.
Australian EMC Regulations
The C-Tick mark is a registered trademark of the Spectrum
Management Agency of Australia. This signifies compliance with
the Australian EMC Framework Regulations under the terms of
the Radiocommunications Act of 1992.
Noise Declaration (German)
LpA<70dB
am Arbeitsplatz (operator position)
normaler Betrieb (normal position)
nach DIN 45635 pt.19 (per ISO 7779)
ISM 1-A