HP 37717C, Calibration Manual, Page: 27 / 399

1-6
General Information
Safety Precautions for the Operator
Safety Precautions
for the Operator
The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates safety
standards of design, manufacture, and intended use of the instrument. Hewlett-
Packard Company assumes no liability for the customer’s failure to comply with
these requirements.
In particular, the operator should note the following safety information:
• “Safety Symbols” on page 1-7
•
“Connecting to the Power Supply” on page 2-4
• “Operating Environment” on page 2-2
•
“Fuse Replacement” on page 2-3
• “Operators Maintenance” on page 1-8
•
“Lifting/Carrying the HP 37717C” on page 1-6
DO NOT operate damaged equipment: Whenever it is possible that the safety
protection features built into this product have been impaired, either through
physical damage, excessive moisture, or any other reason, REMOVE POWER and
do not use the product until safe operation can be verified by service-trained
personnel. If necessary, return the product to a Hewlett-Packard Sales and Service
Office for service and repair to ensure the safety features are maintained.
Lifting/Carrying the HP 37717C
Before attempting to lift or carry the instrument consider the following basic lifting
techniques to help avoid personal injury.
Using both arms to lift instrument.
•
Reach for the instrument - bend your knees and waist, and keep your back
straight.
•
GRASP the instrument firmly.
• LIFT with your legs.
•
KEEP your shoulders level.