GE CARESCAPE, User Manual

Page: 505 / 548

Messages
Message
Location Explanation What to do
●
Lab data interface
failed
●
al. area Unity Network Interface Device
(ID): There is a communication
failure or error between the
Unity Network Interface Device
(ID) and the interfaced device.
●
Check the interfaced device.
●
If the problem persists,
contact authorized service
personnel.
●
Mark xxx
●
where xxx = snapshot
sequence number
●
alarm
area A snapshot has been taken
manually.
●
No action required.
●
Snapshot created
●
al. area A snapshot has been created.
●
No action required.
●
Snapshot memory
full. Oldest snapshot
erased.
●
al. area You are trying to save a snapshot
but the memory capacity is full.
●
No action required.
●
ST snapshot created
●
al. area ST snapshot created.
●
No action required.
●
ST snapshot memory
full. Oldest ST
snapshot erased.
●
al. area
You are trying to save an ST
snapshot but the memory
capacity is full.
●
No action required.
●
Sweep Speed
Changed
●
wavef. Sweep speed of the realtime
waveform has changed.
●
No action required.
●
Waveform available
only for 2min and
4min time scales
●
wavef. High Resolution trends license is
configured for HR, Resp, SpO
2
,
CO
2
and MAP.
●
Change trend resolution to 2
minute or 4 minute time scale
for the affected parameter.
Messages related to various situations
For information regarding alarm priorities and escalation times, see the CARESCAPE Modular
Monitors Supplemental Information Manual.
Make sure you are familiar with the generic layout of the screen. This will help you identify
where on screen the following messages appear. The message location is indicated with the
following abbreviations:
●
al. area = alarm area
●
param. = parameter window
●
report = report view
●
wavef. = waveform area
Message Location
Explanation What to do
●
ADT server
communication
failure
●
al. area An error occurred when trying
to search for patient on the ADT
server.
●
Check the network
connectivity.
●
Retry loading from the
network.
●
If the problem persists,
contact authorized service
personnel.
●
Alarm setup changed
remotely
●
al. area The alarm setup is retrieved from
the telemetry server or central
station.
●
Check the alarm settings and
adjust if necessary.
2062971-001 CARESCAPE Modular Monitors 505