GE CARESCAPE, User Manual

Page: 473 / 548

Messages
Message
Location Explanation What to do
●
Call service: Error x
●
where x = 0 - 99
●
param.
0 = RAM failure
1 = ROM checksum failure
2 = +15V failure
3 = -15V failure
6 = ADC error
7 = Watchdog time too short
8 = Watchdog time too long
9 = Watchdog activated
10 = EEPROM checksum error
11 = Autozero range exceeded
12 = Communication watchdog
activated
13 = Not in use
14 = Too early autocycle start
●
Contact authorized service
personnel.
●
Check NIBP
●
al. area
Systolic and/or diastolic results
missing.
●
Check the patient status.
●
Check NIBP cuff and hoses.
●
Repeat the measurement.
●
Control measurement
●
al. area Pressure alarm limit exceeded.
●
Allow measurement to
complete.
●
Check the patient status.
●
Cuff occlusion
●
param.
Occlusion during measurement
or overpressured cuff.
●
Check the cuff.
●
Cuff loose
●
param.
Loose cuff or cuff hose.
●
Check the cuff and cuff hose.
●
Cuff overpressure
●
param.
NIBP cuff is squeezed during
measurement.
●
Check NIBP cuff and hoses.
●
Repeat the measurement.
●
Incorrect infl. limits
●
param.
Adult or child cuff is used, but the
selected infant mode restricts
the inflation pressure too low to
be able to measure the blood
pressure.
●
Adjust NIBP setup.
●
Long meas. time
●
param.
The measurement time is long.
The triggering values vary
according to the module and
inflation limits in use:
●
PSM: >2 min for adult/ child,
75 s to 80 s for infant
●
PDM: >2 min for adult/ child,
85 s for infant
●
TRAM: <3 min for adult/ child,
90 s for infant
●
Check the patient status.
●
Check the cuff and hose
connections.
●
Restart the measurement.
●
If the problem persists,
contact authorized service
personnel.
●
NIBP air leakage /
NIBP manual
●
al. area Loose cuff or cuff hose.
●
Check the cuff and cuff hose.
2062971-001 CARESCAPE Modular Monitors 473