GE CARESCAPE, User Manual

Page: 503 / 548

Messages
Message
Location Explanation What to do
●
Replace sensor
●
param.
The sensor date has expired, the
sensor has been used too many
times, or the validity time for the
sensor cannot be determined.
●
Replace the sensor.
●
Sensor check failed
●
param.,
wavef.
The sensor has not passed the
impedance check.
●
Check sensor placement and
attachment.
●
Press each electrode in the
sensor.
●
Replace the sensor.
●
Testing DSC ●
param.,
wavef.
The BISx test has been activated.
●
Wait until the check is
completed.
Messages related to TC measurement
For information regarding alarm priorities and escalation times, see the CARESCAPE Modular
Monitors Supplemental Information Manual.
Make sure you are familiar with the generic layout of the screen. This will help you identify
where on screen the following messages appear. The message location is indicated with the
following abbreviations:
●
al. area = alarm area
●
param. = parameter window
●
report = report view
●
wavef. = waveform area
Message Location
Explanation What to do
●
Calibrating
●
param.
Calibration is in progress.
●
No action required.
●
Calibration error
●
param.
Unsuccessful calibration.
●
Authorized service personnel
should repeat the calibration
procedure.
●
Connecting
●
param.
Connection to the interfaced
device is being established.
●
No action required.
●
Ext device error
●
param.
Interfaced device should be
checked.
●
Check the interfaced device.
●
If the problem persists,
contact authorized service
personnel.
●
No ext device
●
param.
Interfaced device should be
checked.
●
Check the interfaced device.
●
If the problem persists,
contact authorized service
personnel.
●
Not calibrated
●
param.
Measurement needs to be
calibrated.
●
Perform calibration.
●
Ready
●
param.
Measurement is ready.
●
No action required.
2062971-001 CARESCAPE Modular Monitors 503