GE CARESCAPE, User Manual

Page: 81 / 548

System introduction
The remote alarm box provides alarm notification at a location remote from the
monitor. The remote alarm box interfaces to the monitor via an M-port. All high and
medium alarms are sent to the remote alarm box.
iPanel software application
B850 and B450 only.
The iPanel application, viewable from one of the monitor’s display screens, gives
access to desktops created by the hospital IT. These desktops provide patient
information from other systems that may be installed at the hospital [e.g.,
Centricity Clinical Information View (Centricity CIV), MUSE Web, and Picture Archiving
Communications System (PACS)]. Desktops can be created with customer defined
resolutions using the hospital-wide login and identification process. The iPanel
application is used through a Citrix thin client on the monitor so no additional
equipment is required at the bedside.
See the CARESCAPE Modular Monitors Supplemental Information Manual for the iPanel
application default settings. See the CARESCAPE Monitor B850 Technical Manual and
the CARESCAPE Monitor B450 Technical Manual for configuring the size, location,
and behavior of the iPanel application.
Equipment symbols
The following symbols appear on one or more of the devices.
Bell cancel. Audio off.
Audio pause. Temporary audio off.
General alarm.
Fuse. Replace with identical type and rating fuse.
Do not reuse.
2062971-001 CARESCAPE Modular Monitors 81