GE CARESCAPE, User Manual

Page: 113 / 548

Setting up the monitor before use
Checking the PDM battery status
1. Select the battery status area in the upper right corner of the screen, or select
Monitor Setup > Battery Status .
2. B650, B450 only: Select the PDM tab. With the B850 the PDM battery status view
opens automatically.
3. Check the battery status information.
Checking the monitor battery status
B650 and B450 only.
1. Select the battery status area in the upper right corner of the screen, or
select
Monitor Setup > Battery Status .
2. Check the Monitor battery status information that appears.
If the B450 has two batteries inserted, there are two columns, A and B , that show
information for each battery.
3. If you wish to see more detailed battery information, select the Advanced tab.
Setting the touchscreen off
You can set the touchscreen feature off for 30 seconds at a time when you need to
clean the screen. The countdown timer appears on the screen.
1. Select Monitor Setup .
2. Select Touchscreen Off .
3. To enable the touchscreen, press any monitor hardkey or use the Trim Knob, or
press
Cancel in the Touchscreen Off display for three seconds.
B850 with several screens
You can define the screen settings for several screens with the B850. For instance, you
can select which applications they show, do they show menus and/or alarms etc.
For more information, see the CARESCAPE Modular Monitors Supplemental
Information Manual.
Other setup changes
All other setup changes, like care unit settings and profile settings, require a password.
For more information, see the CARESCAPE Modular Monitors Supplemental
Information Manual.
2062971-001 CARESCAPE Modular Monitors 113