GE CARESCAPE, User Manual

Page: 446 / 548

Viewing other monitored patients
5. You can select to see a list of all patient beds in the care unit or a list of remote
patient beds configured for alarm notification. Select an option from the
Show list:
●
To show a list of all the remote beds in the care unit, select All Patients .
●
To show the list of remote patients configured for alarm notification, select
Notification Patients Only .
6. Select a patient bed from the displayed list.
7. Select View .
8. You can stop viewing the selected patient bed and close the bed-to-bed window
by selecting
Close View .
NOTE
Selecting the home key will not close any open bed-to-bed
view of an alarming or non-alarming patient bed.
Audio pause for a remote patient bed alarms
NOTE
This feature is available with the CARESCAPE Network only.
You can pause active alarms for the remote bed viewed by selecting Remote from
the bed-to-bed window. If the selection is not selectable, this option has not been
enabled during configuration. It is enabled in the
Care Unit Settings and it is password
protected. In addition, the remote monitor’s settings may prevent remote silencing
from taking place.
Manual printing of remote bed waveforms
NOTE
CARESCAPE Network only.
Waveform data of a remote monitor can be manually printed by selecting Print from
the bed-to-bed window. With the B850, waveforms are printed using the local PRN-50
recorder if available, otherwise the printer is determined by the remote monitor’s
print configuration. The waveforms that appear on the printout are determined by
the remote monitor’s print configuration.
446 CARESCAPE Modular Monitors 2062971-001