Fuji Xerox Versant 80 Press, User Manual

Page: 834 / 1019

22 Problem Solving
834
Pro
b
le
m
Solvin
g
22
049-700 [Cause] Probable causes are as follows:
1)The output destination was changed to the Stacker Output Tray although you
selected the Stacker Tray, because the tab paper cannot be output to the stacker.
2)The output destination was changed to the Stacker Output Tray although you
selected the Stacker Tray, because the loaded paper is smaller than the supported
paper size for outputting to the stacker.
3)The stacker is not connected correctly or it is defective.
[Remedy] For 1), use other paper than tab paper.
For 2), use the paper whose size is supported by the stacker.
For 3), confirm that the stacker is connected correctly. If the same message is displayed
again, contact our Customer Support Center.
059-335
059-399 [Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
060-325
060-326
060-328
060-330
060-331
060-332
060-333
060-334
060-339
060-340 [Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
061-310
061-311
061-313
061-315
061-317
061-319
061-321
061-323
061-325
061-326
061-327
061-328
061-329
061-338
061-339
061-340
061-341
061-342
061-343
061-349
061-380
061-381
061-382
061-383 [Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
Error Code Cause and Remedy