Fuji Xerox Versant 80 Press, User Manual

Page: 477 / 1019

Connectivity & Network Setup
477
Too
ls
13
Ping Connection Test
Allows you to confirm whether the machine connects your computer properly or not with the
configured condition. Set the following setting and then select the [Start] button to start
Ping connection test.
„
Network Interface
Select [Ethernet 1] or [Ethernet 2] according to the protocol settings.
Note • This item is displayed only when Secondary Ethernet (optional) is installed on the machine.
„
Protocol
Select [IPv4] or [IPv6] according to the protocol settings.
„
IP Address or Host Name
Enter the IP address or host name. When using IP address, enter the IPv4 address or IPv6
address. When using host name, enter the host name with up to 32 single-byte characters.
Machine’s E-mail Address/Host Name
Set the e-mail address, host name, and domain name of the machine.
E-mail Address
Enter the E-mail address of the machine with up to 128 single-byte characters.
„
When receiving E-mail via SMTP
You can set any name for the account (on the left side of @). Set the address section (on the
right side of @), with the combination of the host name and domain name. An alias cannot
be set.
For Example: mymail@myhost.example.com
z Account name: mymail
z Host name: myhost
z Domain Name: example.com
„
When receiving E-mails via POP3
Enter the POP user name (on the left side of @) and incoming POP3 mail server name in the
address section (on the right side of @). You can set an alias, such as mymail@example.com.
For Example: mymail@myhost.example.com
z Account name: mymail
Machine Name
Enter the machine name with up to 32 single-byte characters.
Host Name
Enter the host name with up to 32 single-byte characters.
Important • When you use SMB, enter the first 15 letters of the host name.
The host name must be up to 15 single-byte characters to identify the machine properly.
Domain Name
Enter the domain name with up to 64 single-byte characters.