Fuji Xerox Versant 80 Press, User Manual

Page: 60 / 1019

2 Product Overview
60
Pr
o
d
uct
O
v
er
v
iew
2
„
Finisher D4 (optional), Finisher D4 with Booklet Maker (optional), D4/D5 Folder Unit
(optional), Finisher D5 (optional)
*1 : Available when the Finisher D4 with Booklet Maker is installed
*2 : Available when the D4/D5 Folder Unit is installed
1
2
3 4
5
7 8
9 10 12 11 14 15 13
6
No. Component Function
1 Tray T1 (Inserter) Load paper for covers or separators. Paper loaded here is not used for
copying or printing.
2 De-curl button Press this button to decurl copies.
3 Output tray Outputs are delivered here.
4 Finisher tray Outputs are delivered here.
5
Booklet tray
*1 Receives copies when you select [Fold Only] or [Fold & Staple].
6 Ground fault interrupter Automatically shuts off electricity in the event of current leakage.
7
Booklet tray button
*1 Press this button to deliver booklets to retrieval position.
8 Finisher right door Open this cover to clear paper jams, replace a staple cartridge, or remove
jammed staples or punch scraps.
9
Booklet staple cartridges
*1 Two staple cartridges for booklet. Remove these cartridges when replacing
them with new ones, or when clearing staple jams.
10 Staple waste container Receives scraps from the stapler. Take this container out when replacing it
with a new one.
11 Staple cartridge Contains staples. Take this cartridge out when replacing the cartridge with a
new one, or when clearing staple jams.
12 Hole punch waste container Holds punch scraps. Take this container out when removing scraps.
13
Folder output tray
*2
Receives copies when you select [Z Fold] or [C Fold].
14
Folder output tray button
*2 Press this button to open the folder output tray.
15 Finisher left door Open this door to access the inside of the machine to clear paper jams.