Fuji Xerox Versant 80 Press, User Manual

Page: 844 / 1019

22 Problem Solving
844
Pro
b
le
m
Solvin
g
22
116-389 [Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
116-390
[Cause] An error occurred in the machine.
[Remedy] Follow the message displayed on the touch screen and initialize the memory of the
machine.
116-391
116-392
116-393
116-394
116-395
116-396
116-397
116-399 [Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
116-700 [Cause] Memory is insufficient for Image Extension Kit.
[Remedy] Select Standard for the image quality.
116-701 [Cause] Unable to use the 2 Sided Printing feature because of insufficient memory.
[Remedy] Set [Image Quality] to [Standard] using the print driver.
116-702
[Cause] A print job was processed using a substitute font.
[Remedy] Check the print data.
116-704
116-705
116-706
116-707
116-708
116-709 [Cause] An error occurred when reading data on the media.
[Remedy] Use a computer to confirm the content recorded on the media.
116-710 [Cause] The correct document size could not be judged because the receive data exceeded the
HP-GL/2 spool size.
[Remedy] Increase the size assigned to HP-GL/2 auto layout memory.
116-711
[Cause] The size and orientation of the form specified are not matched with the paper to be
printed.
[Remedy] Match the size and orientation of the paper with the form specified, and print again.
116-713 [Cause] The job was divided to be printed because of insufficient disk space.
[Remedy] Delete unnecessary data from the hard disk to free up disk space.
116-714 [Cause] An HP-GL/2 command error occurred.
[Remedy] Check the print data.
116-716
116-717
[Cause] An error occurred when reading the data on the media.
[Remedy] On a computer, confirm the content recorded on the media.
116-720 [Cause] An error occurred during print processing because of insufficient memory.
[Remedy] Stop unnecessary ports or delete unnecessary data to free up disk space.
Error Code Cause and Remedy