manualshive.com logo in svg

Fuji Xerox Versant 80 Press, User Manual

The Xerox Versant 80 Press is a cutting-edge printing machine delivering high-quality results. Ensure operator safety and equipment longevity by referring to the comprehensive Safety Manual. Download this manual for free from our website, providing easy access to essential instructions and guidelines to maximize your Versant 80 experience.

Share
Download
background image

22 Problem Solving

772

Pro

b

le

m

 Solvin

g

22

016-519

[Cause]

The number of pages reached the maximum number of pages specified, and the print 
job is terminated.

[Remedy] Have your system administrator change the maximum limit of printable pages.

016-520

[Cause]

An error occurred in the high compression hardware.

[Remedy] Execute the operation again. Also change the output file format and color mode.

If the problem is not resolved, switch off the machine power, make sure that the touch 
screen is blank, and then switch on the machine power. And then perform the above 
operation again.

If the error still is not resolved, contact our Customer Support Center.

016-521

[Cause]

The IC Card Reader (sold separately) is disconnected from the machine while scanning 
the data with a digital signature.

[Remedy] Switch off the machine power and connect the IC Card Reader, and then switch on the 

machine power.

016-522

[Cause]

LDAP server SSL authentication error. Unable to acquire an SSL client certificate.

[Remedy] The LDAP server is requesting an SSL client certificate. Set an SSL client certificate on 

the machine.

016-523

[Cause]

LDAP server SSL authentication error. The server certificate data is incorrect.

[Remedy] The machine cannot trust the SSL certificate of the LDAP server. Register the root 

certificate for the LDAP server's SSL certificate to the machine.

016-524

[Cause]

LDAP server SSL authentication error. The server certificate will expire soon.

[Remedy] Change the SSL certificate of the LDAP server to a valid one. You can clear this error by 

selecting [Disabled] for [LDAP - SSL/TLS Communication] under [SSL/TLS Settings] on 
the machine; however, note that selecting this option does not ensure the validity of the 
LDAP server.

016-525

[Cause]

LDAP server SSL authentication error. The server certificate has expired.

[Remedy] Change the SSL certificate of the LDAP server to a valid one. You can clear this error by 

selecting [Disabled] for [LDAP - SSL/TLS Communication] under [SSL/TLS Settings] on 
the machine; however, note that selecting this option does not ensure the validity of the 
LDAP server.

016-526

[Cause]

LDAP server SSL authentication error. The server name does not match the certificate.

[Remedy] Set the same LDAP server address to the machine and to the SSL certificate of the LDAP 

server. You can clear this error by selecting [Disabled] for [LDAP - SSL/TLS 
Communication] under [SSL/TLS Settings] on the machine; however, note that selecting 
this option does not ensure the validity of the LDAP server.

016-527

[Cause]

LDAP server SSL authentication error. This is an SSL authentication internal error.

[Remedy] An error occurred in the software. Contact our Customer Support Center.

016-528

[Cause]

You are logged out of the smart card authentication mode while scanning the data with 
a digital signature.

[Remedy] Log in to the machine with the smart card, and then execute the operation again.

016-529

[Cause]

An error occurred when connecting to the Remote Download server. There was no 
response from the server within the specified time (45 seconds).

[Remedy] Confirm the network connection. Check whether the Remote Download server is 

correctly set on the network.

Error Code

Cause and Remedy

Summary of Contents for Versant 80 Press




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Versant 80 Press

Radio Shack DMP-200 Operation Manual preview
DMP-200
Brand: Radio Shack Pages: 62
IBM 5218 Setup Procedures preview
5218
Brand: IBM Pages: 60
Samsung CLX-9350ND Service Manual preview
CLX-9350ND
Brand: Samsung Pages: 549
Xerox Nuvera 120 EA Customer Information preview
Nuvera 120 EA
Brand: Xerox Pages: 5
Oki ES9466 Manual preview
ES9466
Brand: Oki Pages: 52
DNP ID400 DC3 Installation Manual preview
ID400 DC3
Brand: DNP Pages: 2
Wang 2231W-1 Maintenance Manual preview
2231W-1
Brand: Wang Pages: 181
Oki C542 Advanced Manual preview
C542
Brand: Oki Pages: 255
ICT GP83 Service Manual preview
GP83
Brand: ICT Pages: 34
Konica Minolta bizhub 361 Short Manual preview
bizhub 361
Brand: Konica Minolta Pages: 3
Oki IP-7900-21 Advanced Operation Manual preview
IP-7900-21
Brand: Oki Pages: 109
3nStar RPT008 Programmer'S Manual preview
RPT008
Brand: 3nStar Pages: 44
EBS EBS-6500 Basic Manual preview
EBS-6500
Brand: EBS Pages: 20
Kyocera TASKalfa 5004i Quick Manual preview
TASKalfa 5004i
Brand: Kyocera Pages: 28
EcLine EC-PM-80320D User Manual preview
EC-PM-80320D
Brand: EcLine Pages: 72
L-Mark LK-330E User Manual preview
LK-330E
Brand: L-Mark Pages: 62
SNBC BTP-M300 Programming Manual preview
BTP-M300
Brand: SNBC Pages: 52
Brother HL-3400CN Series User Manual preview
HL-3400CN Series
Brand: Brother Pages: 280

Brands by name

Popular brands

Load more brands