Fuji Xerox Versant 80 Press, User Manual

Page: 537 / 1019

Accounting
537
Too
ls
13
Passcode
Set a passcode. Setting a passcode is strongly recommended for security. Set a passcode
from 4 to 12 digits.
Note • When [Passcode Entry for Control Panel Login] is set to [On], a passcode entry is required upon user
authentication.
For information on how to change your passcode later, refer to "Changing Passcode" (P.660).
E-mail Address
Enter an e-mail address with up to 128 characters. The address set here will be set as [From]
under [E-mail].
For information about how to enter characters, refer to "Entering Text" (P.90).
Device Access
Set whether to allow the machine use.
„
Enabled
Allows the machine use. When the smart card reader is connected, you can select the
settings for each Login Type.
„
Disabled
Prohibits the machine use.
Service Access
You can place restrictions on the use and the maximum number of allowed pages for each
of the Copy, Scan, and Print services.
1
Select [Service Access].
2
Select a feature to restrict.
3
To set account limits, select [Change Account Limit], and then enter the maximum number
of pages with the numeric keypad.
„
Feature Access
Set access restrictions on features.
z Free Access
The feature is not restricted.
z
No Access to Copy/Scan/Print Service
Allows you to restrict the use of the Copy, Scan, or Print service.
„
Change Account Limit
Set the maximum number of pages for copying, scanning, or printing.
You can specify a number from 1 to 9,999,999 (7 digits) pages in 1 page increments.