Fuji Xerox Versant 80 Press, User Manual

Page: 456 / 1019

13 Tools
456
Too
ls
13
Document Feeder Tray Elevation
When a document is loaded in the document feeder, set to which timing to raise a document
feeder tray can be performed. Select either [When loading originals] or [When pressing
Start].
Check Document Guides Position
Set whether or not to display the confirmation screen when you set the guide position of the
document feeder to 8.5" and start loading. Select from [No] or [Yes].
Restrict Recipient Selection Method
Allows you to select whether or not to restrict an e-mail transmissions to addresses not
registered on the Address Book.
Selecting [Only From Address Book] disables address entry using the keyboard or numeric
keypad, and permits only transmission to addresses registered on the Address Book.
Note • You can also give users authority to deactivate [Restrict Recipient Selection Method]. For more
information, refer to "User Roles and Authorization Groups" (P.638).
Restrict User to Edit Address Book
Specify whether or not to permit local users to add and edit recipients in the Address Book.
When you select [Yes], local users cannot add or edit the Address Book.
Note • You can also give users authority to deactivate [Restrict User to Edit Address Book]. For more
information, refer to "User Roles and Authorization Groups" (P.638).
Data Indicator
Allows you to set the lighting pattern of the <Data> indicator.
„
Pattern 1
Lights up when a document is stored in the hard disk (optional) of the machine.
„
Pattern 3
Lights up for 30 seconds after a job in the print queue is printed.
Ink Setoff Prevention
When you operate continuous printing using certain type of paper and leave the output
paper on the output tray for a certain time, the melting of ink and the gaining of paper
weight cause adhesion between the paper sheets.
Set whether or not to allow increasing the output interval to prevent transfer of ink.
„
Off
Outputs at a usual interval.
„
Always On
Outputs at an increased interval for all types of paper.
„
On for Required Paper Only
Outputs at an increased interval only for required type of paper.