Fuji Xerox Versant 80 Press, User Manual

Page: 572 / 1019

15 Printer Environment Settings
572
P
rin
ter E
n
v
iro
nme
n
t Se
tti
ng
s
15
For information on how to set an IP address, refer to "Protocol Settings" (P.473).
4
Select [Close] repeatedly until the [Tools] screen is displayed.
5
Select [Close].
Note • Rebooting the machine may be required depending on the settings. When a message displayed on
the screen, follow the message and reboot the machine.
6
Print a configuration report to confirm that the IPP port is enabled and that TCP/IP is set
up correctly.
For information on how to print a configuration report, refer to "Print Reports" (P.622).
7
Configure other IPP settings as necessary.
Refer to "CentreWare Internet Services Setting Items" (P.572).
Step 3 Configuration on the Computer
To print from the machine, you need to install a print driver on your computer.
Note • Download the print driver from our official web site.
For information on the supported operating systems, refer to "Supported Operating Systems" (P.565).
CentreWare Internet Services Setting Items
You can configure the following setting items using CentreWare Internet Services:
For details on the setting items, click [Help] at the upper right corner of the CentreWare Internet Services screen to see help.
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
connect to the internet. The communication fee shall be borne by you.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.557).
z
Spool Destination for Jobs
([Properties] > [General Setup] > [Memory Settings] > [IPP])
z Port Settings
z Add Port Number
z Administrator Mode
z DNS
z Connection Time-Out