Install the Ink Tanks
Unpack the Printer
1
2
3
4
5
Prepare the Printer
Install the Print Head
Photo Printer
Connect the Printer
To Your Computer
Start Here
Easy Setup Instructions
S530D
Turn the printer off.
Connect one end of the USB cable
to the computer, the other to the printer.
IMPORTANT:
Be sure the printer is
off before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
Continue with Step 6
on side two.
USB Port
USB Cable
Protective cap
Insert the ink tank into the correct slot.
(Refer to the color guide on the print head.)
Press down gently until the ink tank locks
into place.
Pull the orange tab off the yellow ink tank
(BCI-3eY), then remove and discard the
plastic wrapper.
Twist off and discard the orange
protective cap.
NOTE:
To avoid spilling ink, never press on
the sides of an ink tank.
Insert the remaining three ink tanks into
their assigned slots.
Close the front cover and attach the
paper rest and output tray.
Electrical contacts
Gently slide the print head into the holder.
The print head will rest at a slight angle.
Do not press it down.
Remove the print head from its package.
Turn the print head over, then remove
the orange protective cap.
NOTE:
Do not touch the electrical contacts.
Lower the lock lever and gently press
it down until it locks into place.
Raise the gray lock lever.
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
Open the front cover. The print head holder
automatically moves to the center. Remove
the protective tape.
Write down the serial number located to
the right of the print head. You will need
this later to register the product.
Press the POWER button.
Remove the shipping tape from the front
and sides of the printer. Peel off the protective
film from the LCD panel.
Bubble Jet Direct
REFERENCE GUIDE
Carefully remove all items from the box.
S530D
Photo Printer
Documentation
and Software Kit
Paper Rest
Output Tray
Power Cord
S530D Print Head
2 Cables
DIF-B100
DIF-B250
CompactFlash™ Card Adapter
Ink Tanks
BCI-3eC
Cyan BCI-3eM Magenta
BCI-3eBK Black BCI-3eY Yellow
Protective tape
Serial number
POWER
Lamp
POWER
Button
Shipping Tape
Protective Film
1
1
1
1
1
2
3
4
5
4
3
3
2
2
4
5
2
