FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 96 / 236

Task programming List of Task Commands
94 FISCHERSCOPE
®
X-RAY
f10 X Loads - from current directory - product no. X
f11 A,XLoads - from of directory A - product no. X
f12 B Loads - from current directory - product with
designation B
f13 A,BLoads - from directory A - product with
designation B
f15 N Loads Stabi Test product no. N
f16 S Loads Stabi Test product S
Block handling
f20 S Sets Order No.= S
f21 S Sets Lot No.= S
f22 S Sets Operator = S
f25 - Closes block
XY(Z)-stage
f30 x,y,zTable moves to x,y,z (abs. coordinates)
f31 x,y,zTable moves to x,y,z (rel. coordinates)
f32 - Sets offset
f33 - Deletes offset
f35 - Deletes all XY(Z) coordinates
f36 x,y,zAppends XY(Z) coordinates (abs.)
f37 x,y,zAppends XY(Z) coordinates (rel.)
f38 - Test coordinates
f39 - Resets the test counter
Evaluation
p01- Opens block report
p02- Print key (in block report)
p05- Closes block report
p10- Deletes last block
p15 -Deletes last measurement
f62 - Online export ON
f63 - Online export OFF
Labels & Loops
The term "jump address" has the same meaning like the term
"label".
A jump is an exit from the continuous program cycle due to a jump