manualshive.com logo in svg

FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual, Page: 176 / 236

Share
Download
FISCHER FISCHERSCOPE X-RAY XDLM 231 Operator'S Manual Download Page 176

174

FISCHERSCOPE

®

 X-RAY

Pattern Recognition (XDLM 237)

 

21.3 Pattern Recognition: Contact Pads of SMD Components

In the following, the pattern recognition is explained using 

contact pads of SMD components

 as an 

example. The clever arrangement of the search item and the search area produces an automatic 
feed. In this way, you do not have to carry out any XY programming but can still automatically 
measure at several measuring points.

All settings for the pattern recognition are valid for one product. You can assign every product its 
own settings for pattern recognition.

Before you start

You have installed at least version 6.30 of the WinFTM software and activated the WinFTM exten-
sion SUPER. You can determine the WinFTM version via 

Help > About WinFTM...

.

Procedure

1. Place the SMD components equally spaced on a line, see Fig 21.1 on page 175.

2. Move the XY-stage so that the first component is in the middle of the video image; see Fig 21.1 

on page 175.

3. Select 

Video > Pattern matching

 in the menu bar.

The 

Define pattern matching area

 window appears.

4. In the 

Saved pictures

 area, click 

Clear all pict.

.

Any video images saved previously in the product are deleted.

5. Click 

Take new picture

.

The video image appears in the 

Define pattern matching area

 window.

Summary of Contents for FISCHERSCOPE X-RAY XDLM 231













































































































































































































































Reviews:

No comments