FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 78 / 236

Setting Up the Print Form Using PDM Variables Available for Block Evaluation
76 FISCHERSCOPE
®
X-RAY
@NB1Number of readings present in the block that contribute to
the statistical block result
@NCALNumber of single readings that are taken on the calibration
standard during the calibration of the current measurement
application (the current meas. application is that meas.
application that the current product accesses).
Cf. @TCAL.
@NTZText content of the notepad of the product.
Enter/edit notes in the product
-> Command “Product > Modify product”; Tab “Notepad”
@OG1Upper specification limit USL (upper tolerance) for the
presentation and computation of the upper limit
violations in a block
@P<1Percentage of single readings in a block that fall below the
lower specification limit LSL
@P>1Percentage of single readings in a block that exceed the
upper specification limit USL
@PRF“Operator” (= the person making the measurements) of the
selected block, or the information entered into the third entry
field of the dialog window “Order No./ Operator”.
@RG1Range
Difference between the largest (maximum) and smallest
(minimum) single reading of the selected block.
@SD1Standard deviation of the single readings of the selected
block.