FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 140 / 236

138 FISCHERSCOPE ® X-RAY
Programming Coordinates for Automatic Measurements (XDLM 237)
17.7 Programming Individual Points
You can program any desired points on the XY(Z) stage, travel to each individual point and then
store its coordinates.
Before you start
1. Open the window XY(Z) coordinates, ref. Chap. 17.5 on Page 136.
2. Delete all coordinates that are no longer applicable, ref. Chap. 17.6 on Page 137.
Procedure
1. From the programming field select the option Points .
2. Travel to the desired measurement point: In the video image, use the mouse to click the desired
location or use the joystick at the front of the instrument.
3. Click Store .
4. Repeat steps 2 to 3 for each desired measurement point.
What you can do next
You can now travel to all programmed points (ref. Chap. 17.13 on Page 143) or program one or
two datum points (ref. Chap. 17.12 on Page 142).
17.8 Programming a Line
To program a line, define the starting point and the end point and the number of interim points on
the line.
Before you start
1. Open the window XY(Z) coordinates (ref. Chap. 17.5 on Page 136).
2. Delete all coordinates (ref. Chap. 17.6 on Page 137).
Procedure
1. From the programming field select the option Points .
2. Travel to the starting point of the line: In the video image, use the mouse to click the desired
location or use the joystick at the front of the instrument.
3. Click Store .
4. In the field No. of intermediate pos. , enter the number of points on the line.
5. Travel to the end point of the line: In the video image, use the mouse to click the desired loca-
tion or use the joystick at the front of the instrument.
6. Click Store .
The line is generated from the starting point, the end point and the entered interim points. The
interim points are distributed evenly over the distance.