FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 161 / 236

FISCHERSCOPE ® X-RAY 159
Solution Analysis
19.5.1 Importing a Product
If you have received a new product file from FISCHER, you need to import it. The file name has the
extension
*.sav, *.sv1 or *.sv3 .
Procedure
1. If you have received the product file by e-mail as a file attachment, save the file in a directory
that does not belong to WinFTM, e.g. C:\temp .
2. If you have received the product file by CD, insert the CD into the CD drive.
3. In the WinFTM main window select Product > Copy to/from File… .
The window Copy from/to file appears.
4. Select the tab File >>> Product .
5. Click Select .
6. The window Select file appears.
7. Select the product file and click Select .
The selected path appears in the field File .
8. Click Start copy .
The file will be copied. After this the report The product was copied successfully appears.
9. Click OK .
10.To close the window, click cancel .
What you can do next
Before you can perform measurements using the new product, you need to normalize or calibrate
the product.
19.5.2 Importing a Def.MA
If you have received a new Def.MA file from FISCHER, you need to import it. The file name has
the extension
*.pb0 . After this you create a new measurement application and a product based
on the imported Def.MA.
Procedure
1. If you have received the Def.MA file by e-mail as a file attachment, save the file in a directory
that does not belong to WinFTM, e.g. C:\temp .
2. If you have received the Def.MA file by CD, insert the CD into the CD drive.
3. In the WinFTM main window select Product > Copy to/from File… .
The window Copy from/to file appears.
4. Select the tab File >>> Def.MA .
5. Click Select .
The window Select file appears.
6. Select the Def.MA file and click Select .
The selected path appears in the field File .