FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 43 / 236

FISCHERSCOPE ® X-RAY 41
User Interface of the WinFTM Software
and other process parameters. Furthermore, the SPC chart presentation simplifies the monitoring of
the measurement devices.
Figure 6.3: SPC chart presentation, the upper image shows the mean value over time,
the lower image shows the standard deviation over time
6.4.4 Changing the Measurement Value Presentation
To display or hide result channels
WinFTM BASIC/SUPER/PDM can process up to 24 result channels (coating thickness values or an-
alytical parameters). WinFTM LIGHT can process up to four coating thickness values or up to five
analytical parameters. The result channels are defined within the DefMA.
You can display or hide the result channels defined within the DefMA according to your needs.
1. In the WinFTM main menu, click .
The window Modify product appears.
2. Select the tab Presentation .
3. In the area Display, check or uncheck the result channel to be displayed.
To change the display modes (Large numbers, Listing or SPC presentation)
1. In the WinFTM main menu, click .
The window Modify product appears.
2. Select the tab Presentation .
3. In the area Presentation, select the display mode to Large numbers , Listing or SPC . SPC can
only be selected, if the Block definition is set to fix.