FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 160 / 236

158 FISCHERSCOPE ® X-RAY
Solution Analysis
19.4 Cleaning the Measuring Cell After Use
Before you start
To clean a measuring cell after use you need water and a paper towel or cleaning rag.
Procedure
19.5 Def.MA and Product for the Solution Analysis
Usually you obtain either a product file or a Def.MA file for the solution analysis from FISCHER.
If you obtain a product file from FISCHER, you need to import the product file (see Chap. 19.5.1
on Page 159). The product file contains all relevant settings.
If you obtain a Def.MA file from FISCHER, you need to import the Def.MA file (see Chap. 19.5.2
on Page 159) and then you need to set up a new product file based on this Def.MA file (see
Chap. 19.5.3 on Page 160).
If you have installed the SUPER software, you can create a Def.MA for the solution analysis by your-
self.
The usage of the SUPER software requires deep knowledge of the physics of x-ray fluorescence and
the functionality of the instrument.
Alternatively, you can request a new measurement application from FISCHER. FISCHER offers a
professional service for the creation of customer’s Def.MA.
WARNING Corrosive Liquids
The solution to be analyzed can be corrosive and can cause chemical burns.
►
Avoid contact of the solution with skin or eyes.
►
After skin or eye contact immediately rinse with plenty of water and consult
a physician.
1. Place the measuring cell with the cup opening
pointing down on the work area.
2. Press the clamping ring down to separate the
clamping ring, foil and bottom part. Grab the
clamping ring with the fingers of both hands
such that a uniform pressure is applied to the
entire circumference of the ring.
3. Empty the measuring cell.
4. Dispose of the foil and the chemicals. Observe the relevant waste disposal guidelines.
5. Rinse the measuring cell and the clamping ring thoroughly with water.
6. Dry the parts with a paper towel or a clean rag.