FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 49 / 236

FISCHERSCOPE ® X-RAY 47
User Interface of the WinFTM Software
This function doesn‘t delete a saved spectrum file, but removes it from the spectrum window only.
You can load a saved spectrum into the spectrum window again at any time.
►
In the window Spectrum select Spectrum > Delete .
If you have loaded several spectra, only one spectrum is deleted with this step. You can delete eve-
ry single spectrum one after the other.
6.8.4 Printing a spectrum
You can print all spectra, displayed in the spectrum window together with the spectral lines of the
clicked elements.
►
In the window Spectrum select Spectrum > Print .
Please note that the printout will not go directly onto paper but first into the printer buffer. The
printout will go onto paper when the printer buffer is full or when you close the
Spectrum
window and click the printer icon in the WinFTM main window.
6.8.5 Performing Measurements in the Spectrum Window
Before you start
►
Position the specimen (see Chap. 7.5 on Page 53).
You can display and change the measurement parameters for this particular measurement. If you
change parameters, the change is valid for this particular measurement only. The parameters of the
current product are not influenced by your change. When you close the spectrum window, all
changes will be discarded that you have made here.
►
To display or change the measurement parameters for this particular measurement, select in the
Spectrum window
View > Meas.-Parameter .
Procedure
1. To start a measurement, click .
The measurement runs until you terminate it.
2. To terminate a measurement, click
6.8.6 Determining the Elements of a Sample
Before you start

With this function only solid samples and no coating systems can be analyzed.

Perform a measurement (see Chap. 6.8.5 on Page 47).
Procedure
1. Select in the Spectrum window View > Elements .
You can display the extended elements list. To do so, select in the Spectrum window
View > Full element list .
2. Click into the spectrum window, keep the mouse button pressed and move the cursor to a peak
of the spectrum.