FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 167 / 236

FISCHERSCOPE ® X-RAY 165
Measurement Data Export
Table 20-2: Explanation of the controls of the Exporting data window
Control Explanation
Online-Export ON The measurement data is exported continuously when measurement data
is acquired by the instrument.

The reading is exported directly after a measurement is made.

The block statistics are exported upon block closure.

With product selection, the header is exported.
Template and No. The name and the number of the export template are displayed if an ex-
port template is assigned to the current Product.
►
To assign an export template, click Select… .
Deletes the assignment of an export template to the product.
Export destination
append to file Data is successively written to a file.
Complete file-
handshake
(NET_EXPT.END) WinFTM waits until the handshake file NET_EXPT.END is deleted. This
control box should be enabled only, if the technology of the target com-
puter is capable of handling it.
overwrite file The export file contains only the last exported values, i. e. the old data
will be overwritten.
Destination file Displays the destination file, if already assigned.
►
To assign a destination file for the data export, click Select… .
Filename variable By clicking the list box you can select a rule, how the file name of the ex-
ported data will be created.
send to serial port Data is sent directly to the RS232 interface.
The parameters of the RS232 interface and of the WinFTM software of
the receiving instrument must be the same. Otherwise the receiving instru-
ment will not be able to read the data exported via the RS232 interface.
►
To set the parameters of the RS232 interface select
Evaluation > Export > Define export interface… .
to OLE-Automation WinFTM can be remote controlled via OLE and can transfer data via
OLE. A Visual-Basic (Version 6) program example is included on the Win-
FTM installation CD in the directory
Ser-
vice\OLE_Import_Sample_VisualBasic_6.0\AutomationDemo . This
sample program can be used as a template for the customers own remote
control software.