FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 62 / 236

Product Administration Backing up product or Def.MA files
60 FISCHERSCOPE
®
X-RAY
3. In the WinFTM main window select Product > Copy to/from File… .
The window Copy from/to file appears.
4. Select the tab File >>> Def.MA .
5. Click Select .
The window Select file appears.
6. Select the Def.MA file and click Select .
The selected path appears in the field File .
7. Click Start copy .
The file will be copied. After this the report The Def.MA was copied
successfully appears.
8. Click OK .
9. To close the window, click cancel .
What you can do next
You can now create a new product based on the imported Def.MA.
8.12 Backing up product or Def.MA files
Backing up product or
Def.MA files
Product or Def.MA files can be backed up by copying them to a
different folder of the hard disk or of the network environment or
onto a diskette. Product files can be backed up with or without data.
Select the menu command “Product > Copy from / to file” to start
the backup procedure.
8.13 Reference samples
Reference samples Reference samples (working standards) are specimen with a clearly
defined reference area with a known coating thickness or
composition. Reference samples may be finished parts from one’s
own or someone else’s production that have been measured with a
well and properly calibrated instrument.
Reference samples can be used, for example, to monitor the
measurement devices.
The coating thickness or the composition should be uniform across
the reference area. The reference sample should also exhibit the
same properties (substrate material, composition of coating or
substrate material, etc.) as the specimen for which the product file
has been set up.