FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 24 / 236

22 FISCHERSCOPE ® X-RAY
Set up
3.2 Unpacking the Measuring System
1. Open all containers of the shipment and take out the components.
2. Store the original shipping containers at a safe place.
If you need to transport the instrument, always use the original shipping containers. Failure to
comply will nullify any warranty claims.
3. Place the instrument, the PC with monitor, keyboard and mouse and the printer, if present, on
a sturdy table with the minimum dimensions of 150 x 90 cm (59 in x 35 in). Additional space
is required for the test samples and for other material.
NOTE:
To save space, place the PC under the table and not on top of it. However, consider that you will
need front access to the PC for inserting or removing CD-ROMs and for turning the unit on and off.
3.3 Removing the Shipping Lock
ATTENTION Destruction hazard
The instrument can be destroyed, if you connect the instrument to the line
voltage, before all components of the measuring system are connected to
one another.
►
Do not yet connect the instrument and the PC to the line voltage.
ATTENTION Destruction hazard
Switching on the instrument with mounted shipping lock can destroy the meas-
uring stage of the instrument.
►
Do not switch on the instrument, before the shipping lock is removed.