FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 33 / 236

FISCHERSCOPE ® X-RAY 31
WinFTM File Structure
5 WinFTM File Structure
To ensure correct measurements, a set of specific files needs to be set up. The process flow for set-
ting up the files needed for measurements, is the same on all FISCHERSCOPE X-RAY instruments:
Figure 5.1: Process flow for preparing measurements
The essential content of the files product, measurement application and Def.MA and their relations
among each other is shown in the following figure:
Figure 5.2: Content of the files Def.MA, measurement application and product
Def.MA: Definition of the measurement set-
tings of the application
Product

Measurement results and their presentation

Image of the product

Measurement time and number of measurements

Export masks
Measurement Application

Calibration data (Calibration standard set)

Measurement time during calibration

Number of measurements during calibration

Anode current, aperture
Def.MA

Measurement mode

Type and order of the coatings

Tube voltage

Type and composition of the calibration standards

Treatment of interfering spectra

Special evaluation methods