FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 157 / 236

FISCHERSCOPE ® X-RAY 155
Solution Analysis
19 Solution Analysis
For the solution analysis you need a measuring cell. You fill the measuring cell with the solution to
be analyzed, position the measuring cell and perform the measurement.
The measuring cells are available with different reference plates. When selecting the measuring
cell, note that the characteristic x-ray lines of the sample to be measured may not be too close to
the x-ray lines of the reference plate material. Otherwise, problems may arise during the evaluation
of the spectrum.
Table 19-1: Accessories for the solution analysis
19.1 Structure of the Measuring Cell
Figure 19.1:Structure of a measuring cell for the solution analysis
Order No. Name
603-216 Accessory set for solution analysis Molybdenum: 2 measuring cells (red) with Mo-
lybdenum reference plate, 1 roll of foil
601-564 1 roll of foil
603-215 Measuring cell (red) with clamping ring, with Molybdenum reference plate
603-213 Measuring cell (green) with clamping ring, with Nickel reference plate
603-214 Measuring cell (grey) with clamping ring, with Zirconium reference plate
1 Bottom part of measuring cell
2 Edge of cup
3 Cup
4 Reference plate
5 Clamping ring
6 Drip groove