FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 223 / 236

FISCHERSCOPE ® X-RAY 221
Features of WinFTM BASIC and LIGHT
Joystick at measuring head You can easily control the XY(Z) stage with the joystick at the meas-
uring head.
In addition, you can control the XY(Z) stage with the mouse.
Measurement point over-
view The measurement point overview windows offer you a full over-
view of all programmed points of the current measurement coordi-
nates and of the entire travel range.
Programming individual
coordinates You can program arbitrary individual coordinates, on which meas-
urements will be performed.
Programming lines You can define a start point and an end point of a line and a num-
ber interim points. On these points measurements will be per-
formed.
Programming arrays You can define two corner coordinates of an array and the num-
ber of points within the array (columns and rows). Furthermore you
can define the sequence, in which the points will be travelled. On
these points, measurements will be performed.
Programming patterns You can define a freely programmable geometric pattern of meas-
urement points. You can replicate this pattern as often as you
want. Thus, you can travel the same points on different specimens
or on different parts of the same specimen.
Programming offset In addition to the measuring points (line, array or pattern) you can
define one or two reference points. Thus, you can change speci-
mens and make sure the measurements are performed at the same
coordinates, while the specimen is not located at the same posi-
tion.
Function Description